You are here: Products | FiberLink™ 101S
Visit our new website www.nonwovens.imerys.com for more information.
FiberLink™ 101S
Treated Ground Calcium Carbonate
FiberLink™ 101S is a premium, ultra fine particle size, wet ground marble specifically designed for use in fiber products. The raw powder can be added directly to powdered resin, but should be compounded when using pelletized resin. The powder is post treated to reduce the level of agglomerates.
FiberLink™ 101S is ideal for the following applications:
Spunbond Webs - Melt Blown Webs - Staple Fibers
Benefits of Mineral Additives in Nonwovens - Performance Attributes:
Improved Stiffness - Improved Thermal Conductivity => Faster Throughput - Improved Dart Impact (up to 20% loading) - Increased Opacity
Cost Savings:
Replacement of resin with a lower cost raw material
Lower Carbon Footprint:
Treated GCC has smaller carbon footprint than PP and PE resins*
FiberLink™ 101S
Add up to 20% by weight in Spunbond PP webs.
- Resin Concentrate - recommend 75-85% loading GCC
Add up to 40% by weght in Melt Blown PP Webs
Balance loading with physical property requirements
Increase line speed => Achieve same basis weight.
For detailed formulation advice please contact us.
* Based on 2007 Cradle-to-Gate Life Cycle Inventory of Treated GCC conducted by Imerys.
PRODUCT FOCUS
ImerCure™ X10- Mineral additive for UV-cured clear coatings
ImerCure™ X10 brings an innovative combination of properties to radiation-cured coatings. The specially engineered particle size makes it ideally suited to clear coatings, giving no loss of optical transmission and clarity.... read more
A new generation of high performance Opacifier
Opacilite™ is a high whiteness “flash calcined” kaolin. This patented technique creates large numbers of intrinsically sealed voids within the clay particles. These tiny voids provide outstanding opacifying properties in coatings... read more
ImerSeal™ is engineered for use in moisture curing sealant adhesive systems
ImerSeal™ offers benefits particularly where stability, product performance, whiteness and high thixotropy are required and also where moisture sensitivity of the system is a consideration... read more
A new concept for water based barrier coatings
Imerys has developed new barrier kaolins as part of the BARRISURF™ product line. These hyper-platy, nano-dimensional thickness crystals create a tortuous coating structure that inherently resists penetration...read more
Request SDS
Performance Minerals - Asia/Pacific Safety Data Sheets are available upon request.
Find a Distributor
All products are available from either direct sales offices or through our distributors and agents.