Click 'Go' at any time!

Rubber
Find a Distributor
 
  • Click on the map above to find the nearest Imerys Distributor for Rubber Products.
 
Products for Rubber
 

 
Particle Size (µm)
Product Type
 

#10 WhiteTM
The coarse particle size provides low resin or binder demand and is used in rubber and latex compounds.
12
GCC

Amlok™ 321
An amino-functional hydrated aluminum silicate for use as a reinforcing filler for elastomeric systems.
0.25
Kaolin
 

Atomite®
Atomite has been the choice of plastic processors for over 50 years for its high whiteness, closely controlled fine particle size and ease of dispersion.

3.0
GCC
   

Calwhite™
A general utility fine grind calcium carbonate with good brightness and low residuals.
6.0
GCC
   

Camel-Cal™
A premium ultra-fine particle size wet ground marble.

0.7
GCC
   

Camel-Cal™ ST
A premium, ultra-fine particle size beneficiated marble modified to facilitate dispersion.
0.7
GCC
   

Camel-Fine™
A premium fine particle size beneficiated wet ground marble.
1.8
GCC
   

Camel-Fine™ ST
A premium fine particle treated wet ground marble that improves impact strength and aids processing
1.8
GCC
   

Camel-Wite®
A premium fine wet ground calcium carbonate with excellent whiteness and fine particle size.
3.0
GCC
   

Camel-Wite® ST
A premium fine particle size treated calcium carbonate with excellent whiteness and fine particle size.
3.0
GCC
 

CP Filler®
A coarse particle for applications that do not require the tight color control of Micro-White 100.
~20
GCC
   

Drikalite®
A fine particle size dry ground calcium carbonate with a high brightness and whiteness.
8.0
GCC
   

Gamaco®
The industry standard dry ground three micron product. Used in foam and rubber compounds.
3.0
GCC
   

Gama-Sperse® CS-11
A treated fine wet ground calcium carbonate.
3.0
GCC
 

Glomax® LL
A fine particle size calcined kaolin that provides good heat and chemical resistance and has a low moisture content.
1.5
Kaolin
 

GSP-30™
An economic medium/coarse ground calcium carbonate suited for applications where brightness and color are not paramount.
~20
GCC
   

Hydrite® 121S
A pre-dispersed kaolin pigment that offers a water fractionated controlled particle size distribution.
1.5
Kaolin
   

Hydrite® Flat D
A coarse particle, acid flocculated kaolin clay with controlled particle distribution. Because of its low water, oil and resin demand used in rubber compound applications.
5.0
Kaolin
   

Hydrite® R
A fine particle, acid flocculated kaolin clay with controlled particle distribution and rheological properties. Used in rubber systems where a controlled acid pH is required.
0.8
Kaolin
   

Hydrite® RS
A spray-dried pre-dispersed version of Hydrite R which has been lightly pulverized, improving the compounding in mechanical rubber goods.
0.77
Kaolin
 

Kaopaque® 10
An acid flocculated, delaminated kaolin clay having a high aspect ratio, offering unique properties to the rubber industry.
1.0
Kaolin
 

Kaopaque® 10S
A pre-dispersed delaminated kaolin clay having a high aspect ratio provides unique properties for natural and synthetic rubber goods. A free-flowing-spray-dried powder.

1.0
Kaolin
   

Kotamite®
A premium, fine particle size wet ground marble surface modified to facilitate dispersion and reduce moisture pick-up. Offers an excellent balance of cost and performance in elastomer applications
3.0
GCC
 

Marbledust®
Used in latex and rubber compounds, Marbledust gives a broad range of particle sizes which results in low oil or resin demand.

~25
GCC
 

Mercap™ 100
A sulfur-functional hydrated aluminum silicate for use as a reinforcing filler for elastomeric systems.

0.25
Kaolin
 

Mercap™ 200
A sulfur-functional hydrated aluminum silicate for use as a reinforcing filler for elastomeric systems.

0.25
Kaolin
 

Micro-White® 25
A general purpose carbonate designed for improved powder handling.
3.0
GCC
 

Micro-White® 100
Preferred product for latex applications because of the careful control of oversized particles.

~20
GCC
 

Paragon™
Greater flexibility and higher elongation as well as lower modulus build are benefits in non-dynamic rubber compounds.

1.1
Kaolin
 

Polestar® 400
A premium fine particle calcined kaolin clay with excellent whiteness and processability.
0.6
Kaolin
   

Polestar® 450
A fine particle size calcined kaolin with low moisture content favored in urethanes.
1.5
Kaolin
   

Supercoat®
An ultra fine particle wet ground marble that is the premier industry standard for most thermoplastic elastomers.
1.1
GCC
 

Supermite®
A premium ultra-fine particle size, beneficiated wet ground marble.

1.1
GCC
 

Suprex™
An airfloat beneficiated fine powder for use as a high surface area 'hard" filler for elastomeric systems

0.25
Kaolin
   

Contact Points

Rubber
You are here : North American Performance Minerals |Rubber | Products
 
Camel-Wite ST
 

CAMEL-WITE ST®
A customer making a solvent coating primer was using an expensive organo clay to help rheology and slump. The customer was looking for improved water resistance. After sampling Camel-Wite® ST treated calcium carbonate from Imerys they discovered that Camel-Wite ST not only helped water resistance but also significantly improved slump control, enabling the customer to reduce the amount of organo clay used and save on formulation costs... more info

Featured Case Study

Markets

Product Selector

Rubber