#10 White™
A coarse particle sized dry ground calcium carbonate for flattening in water and solvent-based architectural formulations.

30-50 White™
This dry ground marble has a very coarse particle size controlled between 30 and 50 mesh screens. It is well suited to textured coatings and stuccos.

325FF™
A slightly coarser grade of mica that can supplement enamel hold out characteristics due to its larger particle size. AMC is also an effective material in joint compounds and sealant formulations.

40-200™
This dry ground marble has a very coarse particle size controlled between 40 and 200 mesh screens. It is widely used in applications with high loading levels such as cement finishes, textured coatings and abrasives.

AMC™
A 325 mesh dry ground mica for use in highly filled coatings applications where cracking is a concern. This material is also beneficial for use in industrial coatings requiring good chemical resistance.

AMC™ 150
A coarse ground particle size mica with high platyness.

Atomite®
Atomite, a wet ground calcium carbonate, has been the choice of formulators and compounders for over 50 years for its high whiteness, closely controlled particle size and ease of dispersion.

Calwhite™
Suited for applications in a diverse range of gloss and sheen finishes for water- and solvent-based coatings and primers.

Camel-Cal™
Non flat water-based coatings for optimized gloss, sheen and resin extension.

Camel-Fine™
Non flat water-based coatings where minimal reduction in gloss and sheen are desired.

Camel-Fine™ ST
A fine particle for use in non-flat to gloss solvent and 100% solids systems.

Camel-Wite®
Suited for applications in a diverse range of gloss and sheen finishes for water- and solvent-based coatings and primers.

Camel-Wite® ST
A fine particle for use flat to gloss solvent and 100% solids systems.

CP Filler®
A coarse particle for applications that do not require the tight color control of Micro-White 100.

Drikalite®
A general utility material for use in low sheen water and solvent formulations. Very well suited for traffic marking applications.

Duramite®
A coarse material for flattening and extension properties where a cleaner top cut is required.

Gamaco®
Suited for applications in a diverse range of gloss and sheen finishes for water- and solvent-based coatings and primers.

Gama-Sperse® 255
A coarse material with a very clean top-cut where flattening and smoothness of finish are desired. An excellent choice for powder coatings applications.

Gama-Sperse® 80
A fine ground product for use in mid-sheen water and solvent systems.

Gama-Sperse® CS-11
A fine particle for use flat to gloss solvent and 100% solids systems that utilizes proprietary processing to minimize residual (–OH) functionality.

Glomax® LL
A medium particle calcined kaolin clay that has a long-standing history of performance in a wide range of low sheen coating applications. Glomax LL offers the formulator a balance of opacity, tint strength, and sheen control in water- and solvent-based coatings systems.

Hydrite® 121-S
A pre-dispersed medium particle size kaolin clay that is well suited for use in low – mid sheen water-based formulations.

Hydrite® Flat D
A coarse particle, acid flocculated kaolin clay with controlled particle distribution for use in solvent- and water-based low sheen and primer coatings, Hydrite Flat D has also found utility in adhesives for rheological control.

Hydrite® PXN
A fine particle, acid flocculated kaolin clay with controlled particle distribution that is well suited for use in solvent and water-based coatings where extension characteristics are desired.

Hydrite® R
A fine particle, acid flocculated kaolin clay with controlled particle distribution and rheological properties. Hydrite R is well suited for use in solvent- and water-based coatings as well as color concentrate applications.

ImerSeal™ 75
A fine particle produced utilizing proprietary technology that reduces moisture for improved dispersion efficiency and moisture pick-up properties. A superior choice for urethane, epoxy, and plastisol applications.

Imerys® 1201 Slurry
A pre-dispersed delaminated kaolin clay having a high aspect ratio which leads to enhanced TiO₂ extension, enamel holdout, and stain resistance. Pre-dispersed delaminated kaolin clays are ideally suited for use in water-based coatings and primers.

Kaopaque® 10
An acid flocculated, delaminated kaolin clay having a high aspect ratio which leads to enhanced TiO₂ extension, enamel holdout, and stain resistance in solvent- and water-based coatings and primers.

Kaopaque® 10S
A pre-dispersed delaminated kaolin clay having a high aspect ratio which leads to enhanced TiO2 extension, enamel holdout, and stain resistance. Pre-dispersed delaminated kaolin clays are ideally suited for use in water-based coatings and primers.

Kotamite®
A fine particle for use flat to gloss solvent and 100% solids systems.

LumiCarb™ 395
Designed for systems that need slightly higher optical properties yet still desire a dry ground product.

Marbledust®
A coarse particle for applications that require low oil absorption where some surface roughness is desired. An equally good choice for thermoplastic traffic applications.

Micro-White® 100
A coarse material for use in applications where very low oil absorption is desired. An excellent choice for use in thermoplastic traffic marking applications.

Micro-White® 25
A pre-dispersed material for water-based formulations where Atomite-like properties are desired.

Minspar™ 10
A fine grind feldspar for use in non-flat to gloss, solvent- and water-based interior and exterior formulations. Minspar 10 has a very clean top-size that makes this grade an excellent choice for thin film industrial and powder coatings applications as well as architectural coatings.

Minspar™ 3
A coarse ground feldspar for use in flat solvent- and water-based applications. Minspar 3 is easily dispersed. It is a highly effective product for sheen reduction in flat formulations where durability and abrasion resistance are needed.

Minspar™ 4
A medium grind feldspar for use in low sheen solvent- and water-based applications. The combination of median particle size and a very low 325 mesh residue make this an excellent choice for formulations that benefit from flattening efficiency without roughness. Minspar 4 is an excellent material for use in traffic coatings due to its exterior durability, low oil absorption and good color.

Minspar™ 7
A medium grind feldspar for use in low sheen to semi-gloss, solvent- and water-based interior and exterior formulations. Although a medium-sized product, Minspar 7 has a very clean top cut resulting in 6+ Hegman grind coatings. It is an excellent choice for exterior architectural primers, paints, and stains, interior finishes where abrasion resistance is needed, and industrial applications where chemical resistance is needed.

NeoGen® 2000
A highly-structured, engineered, fine particle thermally-modified clay that offers maximum TiO2 extension, opacity, and tint strength in water- or solvent-based coatings.

OZ White™
A dry ground limestone/marble with a very coarse particle size that is controlled between 6 mesh and 14 mesh. Textured coatings and water treatment are the primary applications.

Polestar® 400
A premium fine particle calcined kaolin clay that offers an excellent balance of opacity, tint strength, and film durability in flat coatings systems.

SnowFlake® P.E.
A medium particle sized material for use in mid to low sheen solvent- and water-based systems.

Supercoat®
A fine particle for higher gloss finishes in solvent and 100% solids systems.

Supermite®
Non flat water-based coatings for optimized gloss, sheen and resin extension.

XO White™
This dry ground marble has a coarse particle size controlled between 16 and 40 mesh screens.

Z White™
A dry ground marble with a coarse particle size that is controlled between 10 and 20 mesh screens. Textured coatings and water treatment are the primary applications.